Documentation · templates

User manual and rating label: what must be on them

The label and the manual are the first things a customer and an inspector see. We show which information is mandatory, and you can prepare a label template and a manual outline right here.

Reading time 6 minutesTemplates: SVG label, Word manual

Why it matters

A product can pass every test and still be withdrawn from sale by the market surveillance authority because of a missing address on the label or a manual in the wrong language. The label and manual are part of the technical documentation and are assessed as strictly as the measurements.

5 mmminimum height of the CE marking
local languagemanual and safety information for each country of sale
1 addresswhere the manufacturer can be reached, not just a website

What must be on the rating label

The label information is required by the directives under which you CE mark the product and by the safety standard for your product. For electronics, it usually comes down to this:

ItemWhat and whyRule
CE markingVisible, legible and indelible, at least 5 mm high, in the prescribed proportions. The notified body number follows the marking only when the notified body is involved in production control.Regulation 765/2008, Annex II
Type and serial or batch numberSo that the product can be traced unambiguously. If it does not fit on the product, put it on the packaging or in the accompanying documents.EMC Art. 7, LVD Art. 6, RED Art. 10
Manufacturer and postal addressName, registered trade name or trademark and an address where you can be contacted. For consumer products, also an e-mail address or website.EMC Art. 7, LVD Art. 6, RED Art. 10, GPSR Art. 9
ImporterIf you import the product from outside the EU, add the importer’s name and address.EMC, LVD, RED – obligations of importers
Electrical ratingsRated voltage, frequency and current or power. The exact scope is set by the safety standard for your product.e.g. EN 62368-1, EN 61010-1, EN 60598-1
Protection class symbolThe double square for products with double insulation (class II). The IP rating, if you declare one.product safety standard
Crossed-out wheeled binThe product must not be disposed of with mixed waste. A bar or the date of placing on the market goes under the symbol.WEEE 2012/19/EU, EN 50419
Small product?If the information does not fit on the product, the directives allow the manufacturer’s address to be given on the packaging or in the accompanying documents. The CE marking, type and serial number should, however, stay on the product itself where possible.

Label template to fill in

Fill in the details and the label is drawn next to the form. Download it as SVG for your designer or label printer. Your data stays in your browser only.

Manufacturer
Product
Electrical ratings

The dashed boxes are placeholders for the CE marking and the WEEE symbol. Insert the official artwork: the CE marking is available on the European Commission website, the WEEE symbol per EN 50419. We do not recommend drawing them by eye; the proportions are prescribed.

A manual must always accompany the product, even industrial equipment. For electronics, these parts must not be missing:

  1. Language. The manual and safety information must be in a language easily understood by users in the country of sale.
  2. Intended use. What the product is for, where it may be used and what it may not be used for.
  3. Safety warnings. The risks and how to avoid them. Specific warnings are prescribed by the product safety standard.
  4. Installation and connection. How to connect, ground and mount the product correctly.
  5. EMC measures. If conformity depends on installation, say so: shielded cables, ferrites, cable length, grounding. A class A product must carry a warning that it may cause interference in a residential environment.
  6. Technical data. Power supply, power consumption, operating temperatures, IP rating, dimensions and weight.
  7. Maintenance and cleaning. What the user may do and what only service may do.
  8. Radio equipment. Frequency bands and maximum transmitted power. Include a copy of the EU declaration of conformity or a simplified declaration with a link to the full text.
  9. Disposal. That the product belongs to the electrical equipment take-back scheme and where to return it.
  10. Manufacturer contact. The same details as on the label; for consumer products, also an e-mail address or website.
Class A productsClass A products under EN 55032 are intended for industrial environments. Their manual must include a warning that they may interfere with radio and TV reception in a residential environment. The EMC Directive also requires any restrictions of use to be clearly stated in the manual and, where appropriate, on the packaging.

Manual outline to fill in

Fill in the basic details and check what applies to you. You get a manual skeleton with the mandatory parts, which you complete with your own texts. Download it for Word.

Product and manufacturer
What applies to you

The outline is an aid. Specific safety warnings are prescribed by your product standard, and the manufacturer is responsible for the content of the manual.

Common mistakes

Free PDF download

The complete CE guide as a PDF

All 11 guides in one document: directives, EMC and safety testing, technical documentation, manual and rating label. For printing and for your team.

We use your data only to provide the document and as per the boxes you checked. You can withdraw your consent at any time at sales@compteq.io. Controller: Compteq.io s.r.o. Privacy policy

Want to be sure nothing is missing?

We review the label, the manual and the entire technical documentation together with EMC and safety testing. Reply within 24 hours; we can usually offer testing within a week.