Test · testing and CE preparation

We find the problems before the certification lab does

We take your product to CE marking and other certifications – we measure in our own lab, and what we cannot do ourselves, we arrange with trusted partners.

What we do for you

View into the EMC chamber through absorber cones towards the antenna
Anechoic EMC chamber, 30 MHz – 18 GHz
Technician adjusting the measuring antenna in the EMC chamber
Setting up a measurement in the chamber
Explaining a measurement next to a log-periodic antenna in the EMC chamber
EMC measurement demo
EMC chamber control room with measuring equipment and a camera view of the chamber
Control room: you see the results right away
Open Vötsch climatic chamber
Climatic chambers −72 to +180 °C

How it works

  1. InquirySend us a message. We reply within 24 hours.
  2. SchedulingWe can usually offer a test slot within a week.
  3. TestingBring your product in person or ship it to us. You are welcome to attend the test.
  4. ResultsYou receive a test report. If something fails, we find the cause and propose a fix.

Equipment we measure with

The parameters that determine what we can test and how large it can be.

EMC chamber

Frequency
30 MHz – 18 GHz
Radiated emissions
30 MHz – 7 GHz, 3 m
RF field
12 V/m, 80 MHz – 3 GHz
Uniform field
1.0 × 1.5 m
Turntable
Ø 1.2 m, 500 kg
Max. sample
1 × 1 × 2 m

Climatic chambers

Units
2 identical
Type
Vötsch C/340/70/3
Temperature
−72 to +180 °C
Humidity
10–98 % RH
Rate of change
3 °C/min
Test space
580 × 765 × 750 mm
Max. weight
80 kg

Hardware compliance

Oscilloscope
Agilent DSA-X 91604A
Bandwidth
16 GHz (33 GHz)
Interfaces
PCIe, USB 3.2, DP, SATA
Ingress protection
IPX1–IPX8, IP1X–IP6X
Electrical safety
62368-1, 61010-1

Frequently asked questions

Is your lab accredited?

No, and it is not needed for CE. For common electronics there is no legal requirement to use an accredited lab for the CE declaration of conformity. Our lab is fully functional and calibrated, and its results are sufficient for you to issue the CE declaration of conformity based on them. If for any reason you prefer confirmation from an accredited lab, we prepare your product for that test and arrange it at an accredited lab.

What should I bring to the test?

A working sample, power supply and cables set up as in normal operation, and a way for us to tell during the test that the product is working. We send the list with our quotation.

What if my product fails?

We find the source of the problem on the spot and propose a fix. Our developers can incorporate it straight into the schematic or board.

I build my device from parts that already have CE. Do I need to test it?

Yes. Whoever sells the assembly under their own name is its manufacturer and must demonstrate conformity of the whole. The documentation from your component suppliers will save you a lot of work, though.

The whole journey under one roof

We take on the whole project, or just the part you need.

Let's talk it through

Tell us what you need. We reply within 24 hours.