What the technical documentation is for
The technical documentation is the evidence that the product meets the rules. It is not sent anywhere, but you must have it ready. If a market surveillance authority requests it, you must provide it.
What belongs in the technical documentation
Each directive defines the exact content. For electronics, this is what usually recurs:
- Product description. What the product does, variants and versions, photos. Identification of the type and of the hardware and firmware versions.
- Schematics and drawings. Electrical schematics, board and mechanical drawings, list of main parts.
- Explanations. A short description of how to read the schematics and drawings and how the product works.
- List of rules and standards. Which directives and harmonized standards you applied, or which other solutions you used and why.
- Risk assessment. Hazards, measures and their verification. For EMC, an electromagnetic compatibility assessment.
- Calculation and test results. Reports from EMC, safety and other tests.
- Supplier documentation. Declarations of conformity for the modules and power supplies used, RoHS declarations.
- Manual and safety information. In the language of the country of sale. What it must contain is covered in our article on the manual and rating label.
- Copy of the EU declaration of conformity. The signed declaration that you issue as the manufacturer.
EU declaration of conformity
A short document in which the manufacturer declares, under its sole responsibility, that the product meets all rules. If several directives apply to the product, one combined declaration is issued. It must contain:
- Product identification: name, type or model, and serial numbers or batch where relevant.
- Name and address of the manufacturer or its authorized representative.
- A statement that the declaration is issued under the sole responsibility of the manufacturer.
- The list of EU rules the product conforms with.
- Harmonized standards or other specifications, including their date of issue.
- Where applicable, details of the notified body and its certificate.
- Place and date of issue, name and function of the signatory, and the signature.
Common mistakes
- The year of the standard is missing. Without it, it is not clear which version you assessed the product against.
- Both EMC and RED are listed. Radio equipment falls under the RED, and EMC is then assessed under it. The EMC Directive is not listed in the declaration.
- The lab signs the declaration. It does not. The lab provides the test report; the manufacturer issues the declaration.
- A declaration for a different version. After changing the board, power supply or radio module, conformity must be reassessed.
The complete CE guide as a PDF
All 11 guides in one document: directives, EMC and safety testing, technical documentation, manual and rating label. For printing and for your team.
Missing test reports?
We test your product in our EMC chamber and deliver the test report and input for the technical documentation. Reply within 24 hours; we can usually offer testing within a week.