Which rules apply to your product?
Electromagnetic compatibility
Directive 2014/30/EU
- Who it applies to
- Almost all electronics. The exception is radio equipment, where EMC is covered under the RED.
- What it requires
- The product must not cause excessive interference and must withstand normal interference from its surroundings.
- How to comply
- Usually assessed by the manufacturer alone (module A). The evidence is testing to standards such as EN 55032 and EN 55035.
Electrical safety (low voltage)
Directive 2014/35/EU
- Who it applies to
- Equipment rated 50–1000 V AC or 75–1500 V DC. Typically anything plugged straight into a wall outlet.
- What it requires
- The product must not endanger people or property: electric shock, overheating, fire, mechanical hazards.
- How to comply
- Always assessed by the manufacturer; no notified body is involved. Standards such as EN 62368-1 or EN 61010-1 are used.
Radio equipment
Directive 2014/53/EU
- Who it applies to
- Anything that intentionally transmits or receives radio waves: Wi-Fi, Bluetooth, LTE, LoRa, GNSS receiver, RFID.
- What it requires
- Safety (with no lower voltage limit), EMC, efficient use of the spectrum and, since 1 August 2025, cybersecurity for internet-connected devices (Regulation (EU) 2022/30, EN 18031 standards).
- How to comply
- Self-assessment by the manufacturer when harmonized standards are applied in full, otherwise with a notified body. A radio module with its own assessment helps a lot.
Hazardous substances
Directive 2011/65/EU
- Who it applies to
- Electrical and electronic equipment, including cables and spare parts.
- What it requires
- Restricts 10 substances: lead, mercury, cadmium, hexavalent chromium, PBB, PBDE and four phthalates.
- How to comply
- Manufacturers demonstrate compliance mainly with documentation from parts suppliers according to EN IEC 63000. Lab analysis only when in doubt.
Cyber resilience
Regulation (EU) 2024/2847
- Who it applies to
- Products with digital elements that can be connected to a device or a network: firmware, applications, connected electronics.
- What it requires
- Secure design, vulnerability handling and updates throughout the support period. From 11 September 2026, actively exploited vulnerabilities must be reported within 24 hours.
- How to comply
- The main obligations and CE under the CRA apply from 11 December 2027. If you are developing now, address it at the design stage.
Other rules not to forget
- Machinery, when the product contains moving parts driven by a motor.
- Medical devices have their own, stricter rules.
- Electronic waste (WEEE) and batteries: obligations when placing on the market, e.g. take-back and marking.
- Automotive: vehicles and their components are approved under UNECE regulations, e.g. R10 for EMC.
If you are not sure, write to us. We reply within 24 hours.
The complete CE guide as a PDF
All 11 guides in one document: directives, EMC and safety testing, technical documentation, manual and rating label. For printing and for your team.
Find out exactly what applies to you
Based on your product description, the calculator selects the rules, standards and tests and shows an indicative price. We can usually offer testing within a week.