Legislation · cybersecurity

What is the CRA and does it apply to you?

The Cyber Resilience Act (CRA) adds cybersecurity to the CE marking. It covers almost every piece of electronics with firmware that can be connected to something. And some of the obligations already apply.

Reading time 6 minutesFully applies from 11 December 2027

Short answer

The CRA is Regulation (EU) 2024/2847. It says that a product with digital elements may be placed on the EU market only if it is secure by design and the manufacturer takes care of its security throughout the support period: fixing vulnerabilities, releasing updates and reporting serious issues. Compliance is demonstrated as with other rules: technical documentation, an EU declaration of conformity and the CE marking.

A regulation, not a directiveThe CRA applies directly and identically in all EU member states, without national transposition.

Which products it covers

All products with digital elements, i.e. hardware and software that can be connected to another device or a network, whether by cable, radio or even USB. Typically:

It does not cover products with their own cybersecurity rules, such as medical devices, motor vehicles or aviation equipment, or products developed exclusively for defense and national security. Open source software not supplied in the course of a commercial activity is also out of scope.

What applies when

Developing right now?A product you start designing today will most likely reach the market after 11 December 2027. It is therefore wise to address security at the design stage. Retrofitting hardware and firmware costs much more.

What manufacturers must do

During design and before placing on the market:

Throughout the support period:

Breaching the essential requirements can result in a fine of up to EUR 15 million or 2.5% of worldwide annual turnover, whichever is higher. The market surveillance authority can also order the product to be withdrawn from the market.

Who assesses the product

The exact classification is set out in Annexes III and IV of the regulation. If you are not sure, we are happy to go through it with you.

The CRA and radio equipment

For internet-connected devices with Wi-Fi, Bluetooth or LTE, the cybersecurity requirements of the RED have applied since 1 August 2025 (Regulation (EU) 2022/30, EN 18031 standards). From 11 December 2027 they will be replaced by the CRA. If you meet EN 18031 today, you are well on your way to the CRA, but the CRA asks for more, mainly vulnerability handling and updates throughout the support period.

How to get started

  1. Check whether the CRA applies to you. Does the product have firmware and some data interface? Then almost certainly yes.
  2. Do a risk assessment. What can be done to the product, what would it cause and how do you prevent it.
  3. Review the design: secure boot, signed updates, default passwords, unnecessary interfaces and debug ports.
  4. Set up a process: who monitors vulnerabilities in the libraries you use, how updates are released and who reports an incident within 24 hours.
  5. Plan the support period and factor it into the product price.

We have been designing embedded hardware and firmware for over 25 years, so we know how to build security into the design from the start. We also pre-test radio equipment to EN 18031. An overview of the other rules is in Directives made simple.

Free PDF download

The complete CE guide as a PDF

All 11 guides in one document: CE, CRA, directives, EMC and safety testing, technical documentation, manual and rating label. For printing and for your team.

We use your data only to provide the document and as per the boxes you checked. You can withdraw your consent at any time at sales@compteq.io. Controller: Compteq.io s.r.o. Privacy policy

Does the CRA apply to your product?

Our EMC and CE calculator also asks about cybersecurity and shows which rules and tests your product faces. Or just write to us.