Short answer
Yes. Anyone who sells an assembly of parts as a single product under their own name is its manufacturer under European rules. They must assess the conformity of the whole assembly, keep technical documentation, draw up an EU declaration of conformity and affix the CE marking.
Who the manufacturer is
The manufacturer is not only someone who makes something from scratch. It is anyone who places the product on the market under their own name or trademark, even if they bought all the parts. They sign the declaration of conformity and they are liable for the product’s conformity.
Why CE on the parts is not enough
CE on a part applies to the part itself and only under the conditions for which its manufacturer assessed it. In your assembly, several things come together at once:
- Cabling between the parts and out of the enclosure often acts as an antenna.
- The enclosure may shield, or have openings through which interference escapes.
- The power supply and its load are different from the part’s test setup.
- The parts interfere with each other. Each passes on its own, but not together.
That is why the assembly is assessed as a new product.
Where this is written
- EMC: Directive 2014/30/EU. It treats a combination of parts sold as a single functional unit as “apparatus”.
- Electrical safety: Directive 2014/35/EU (LVD). It applies to supply voltages of 50–1000 V AC or 75–1500 V DC.
- Radio: if the assembly has Wi-Fi, Bluetooth or LTE, Directive 2014/53/EU (RED) applies, and EMC and safety are then assessed under it. Since 1 August 2025, this also includes cybersecurity (Regulation (EU) 2022/30, EN 18031 standards).
- Hazardous substances: Directive 2011/65/EU (RoHS).
- Framework: the manufacturer’s obligations are described in Decision 768/2008/EC and in the European Commission’s interpretive “Blue Guide” (2022, section 3.1).
Without a declaration of conformity, the market surveillance authority may ban the sale or order the product to be withdrawn from the market and impose a fine. In addition, customers and tender issuers routinely ask for the declaration of conformity.
How to save time and money
- Collect documentation from your suppliers. The parts’ EU declarations of conformity and their RoHS declarations. Without them, you cannot demonstrate RoHS for the assembly.
- Use the parts as their manufacturer prescribes. A radio module with its own assessment, connected according to its instructions (antenna, power), saves you a large part of the radio tests.
- Buy a CE-marked power supply. An external CE-marked adapter greatly simplifies the electrical safety assessment.
- Several variants? Not every one has to be tested. Comparative measurements identify the worst case, and full tests are done only on that one.
- Do pre-compliance testing first. You find out whether the assembly passes and make any changes (ferrites, a filter, shielding) before you pay for full testing.
When it is different
- Powered from an external adapter below 75 V DC: the LVD does not apply to the assembly itself (the adapter has its own CE). EMC still applies.
- You sell the parts separately and the customer assembles them: the customer is then the manufacturer of the assembly.
Our measurements and test report serve as the basis for your declaration of conformity. The declaration is drawn up and signed by the manufacturer, i.e. you.
The complete CE guide as a PDF
All 11 guides in one document: directives, EMC and safety testing, technical documentation, manual and rating label. For printing and for your team.
Find out what applies to your assembly
Based on the interfaces and power supply, the calculator identifies the directives, standards and an indicative testing price. We can usually offer testing within a week.